dielectric mirror coating services

Dielectric Mirrors

Intlvac systems can produce a wide range of multi-layer, dielectric coatings depending on customer requirements. Custom filter options are available using a diverse range of substrates for applications in the VIS, NIR, SWIR, and MWIR spectral regions. Coating examples include:

1. BANDPASS FILTERS
Coating Description

A bandpass filter is designed to transmit energy only within a selected band of wavelengths in the spectrum and reject all other wavelengths

Durability Performance
Adhesion, severe abrasion, humidity as per the following (where applicable): MIL-C-675, MIL-M-13508, MIL-M-14806, MIL-C-48497, MIL-F-48616, MIL-STD-810F

2. LONG WAVE PASS (LWP) FILTERS
Coating Description

A long-wavelength pass filter transmits energy at wavelengths longer than the cut-on wavelength while energy at wavelengths shorter than the cut-on is attenuated.

Durability Performance
Adhesion, severe abrasion, humidity as per the following (where applicable): MIL-C-675, MIL-M-13508, MIL-M-14806, MIL-C-48497, MIL-F-48616, MIL-STD-810F

3. SHORT WAVE PASS (SWP) FILTERS
Coating Description

A short-wavelength pass filter transmits energy at wavelengths shorter than the cut-off wavelength while energy at wavelengths longer than the cut-off is attenuated. 

Durability Performance
Adhesion, severe abrasion, humidity as per the following (where applicable): MIL-C-675, MIL-M-13508, MIL-M-14806, MIL-C-48497, MIL-F-48616, MIL-STD-810F

4. NEUTRAL DENSITY FILTERS
The purpose of the neutral density (ND) coating is to attenuate the incident flux. In its simplest form, the thickness of a single metallic layer is adjusted so that a prescribed transmittance is attained.

For more information about creating a custom solution for your application contact sales@intlvac.com

Thin Film Coating Services